Tag Archives: chains roller conveyor

China wholesaler Drive chain conveyor drives standard pitch industrial heavy-duty carbon steel roller chains

Product Description

Drive chain conveyor drives standard pitch industrial heavy-duty carbon steel roller chains 

Product introduction

Material Carbon steel, alloy steel
Surface Treatment Polishing,Original Colour,Polishing
Applicable Industries Building Material Shops, Manufacturing Plant, Machinery ………
Standard or Nonstandard Standard
Heat Treatment: High Temperature Hardening
Color Elf,dark yellow,dark blue,black
Features

•Large reduction ratio (usually up to 1:7)
•Chains can be used with long shaft center distances (normally up to 4m). By changing the number of links it is possible to freely adjust the shaft center distance.
•The chain can be used on both sides and drive multiple shafts at the same time.
•Easy installation and replacement (easy to cut and connect chains).
•If the distance between shafts is short, it can be used vertically.
•The sprocket diameter of a chain drive could be smaller than a belt pulley while transmitting the same torque.
•Transmitting power by meshing many teeth results in less wear of sprocket teeth than gears.
•Chain drives have greater shock absorption than gear drives.

 

HIGH STHangZhouRD HEAT TREATMENT

Through high standards,strictly control the heat,improve the hardness/strength and provide service life.

STHangZhouRD THICKNESS CHAIN PIECE

The thickness is customized from raw material chain plate in strict accordance with the standard

HIGH QUALITY MATERIAL

Beautiful and corrosion-resistant, the product surface is treated with rust prevention, beautiful and simple!

STHangZhouRD CHINAMFG PIN

Cutting in strict accordance with the standard, second screening,
and never cut corners

Green Power Industry Co Llimited is an international export enterprise combined with factory specializing in the manufacturing of brake system , clutch system,spark plug and chain . Our company is a professional manufacturer and supplier of brake,chain and clutch in China. We both have our own brake CHINAMFG factory, brake pad factory, brake shoe factory ,clutch disc factory,chain factory, spark plug factory .We focus on developing high-quality products for OEM market ,Our company have developed and produced high quality brake in formula non -metallic and asbestos free for automobile and brake shoe assembly for heavy duty truck . The production are noted good characteristics such as high strength , high heat-resisting , wear-resisting.low dust virtue ,no noise and better stability . The series products had been exporting to North -America ,Europe ,Middle -East ,Australia and etc, widely sale to domestic OEM factories and aftermarket.

Our company is composed of professional team , process advanced production inspection and testing equipment Each product have passed the first inspection, process inspection, error prevention, and laboratory tests to ensure that each piece of qualified products sent to customers

We are determined to set up the aim of “excellent quality and satisfying service·, with·the first class quality , reasonable price and perfect service . we set strick demand and operate conforming to the standard to guarantee all the products can be meet our customer’s needs
1.Q: What is the certificate of your factory?
   A: We have passed IAF ISO and TS16949  certification.

2.Q: Can it be produced according to the sample?
   A: Yes, we can produce through your samples or technical drawings. We can build molds and fixtures.

3.Q: Do you test all products before shipping?
   A: Yes, we conduct 100% quality testing before delivery, and we are 100% responsible for product quality.

4.Q: What is your delivery time?
   A:If we have stock, we can send it immediately within a week. If not, it usually ranges from 7 days to 35 days, depending on the quantity.

5.Q: What is your sample policy?
   A: We want to provide you with samples for approval. There will be no charge for 1 or 2 samples, but the customer needs to bear the courier fee first. 
It will be drawback to customer when order placed

6.Q: How do you make our business establish a long-term good cooperative relationship?
   A:1. We maintain excellent quality and competitive prices to ensure that our customers benefit;
      2. We respect every customer as our friend, we do business sincerely and make friends widely,No matter where they come from. 
 

Usage: Transmission Chain, Conveyor Chain
Material: Carbon steel, alloy steel
Surface Treatment: Polishing
Feature: Heat Resistant
Chain Size: 1/2"*3/32"
Structure: Roller Chain
Samples:
US$ 0/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|

Customized Request

heavy duty chain

How do heavy-duty chains handle side loads and lateral forces?

Heavy-duty chains are designed to handle not only axial loads (tension and compression along the chain’s axis) but also side loads and lateral forces. These chains are engineered with specific features that enable them to effectively manage side loads:

  • Thicker Plates: Heavy-duty chains typically have thicker plates compared to standard chains. The increased plate thickness enhances the chain’s resistance to bending and lateral forces.
  • Greater Tensile Strength: Heavy-duty chains are made from high-strength materials, and their construction allows them to withstand higher tensile loads from different directions, including side loads.
  • Enhanced Bushings and Pins: The bushings and pins in heavy-duty chains are more robust, reducing the risk of deformation or failure when subjected to lateral forces.
  • Side Bow Feature: Some heavy-duty chains are designed with a side bow feature, which allows them to better accommodate misalignment and side loads without becoming jammed or damaged.

These features collectively enable heavy-duty chains to handle lateral forces and side loads that may arise in various applications, such as agricultural machinery, construction equipment, and material handling systems. They provide a reliable and durable solution for industries that require chains to cope with complex loading conditions and dynamic forces.

heavy duty chain

Can heavy-duty chains be used in heavy-duty lifting and rigging applications?

Yes, heavy-duty chains are widely used in heavy-duty lifting and rigging applications due to their exceptional strength and durability. These chains are specifically designed to handle heavy loads and are well-suited for various rigging tasks, including hoisting, pulling, and securing heavy objects.

The key features that make heavy-duty chains suitable for such applications include:

  • High Load Capacity: Heavy-duty chains are engineered to withstand extremely high loads, making them ideal for lifting and rigging heavy machinery, equipment, and materials.
  • Robust Construction: These chains are made from high-quality materials and undergo heat treatment processes to enhance their strength and toughness, ensuring they can withstand the stresses of heavy lifting operations.
  • Versatility: Heavy-duty chains come in various configurations, such as single, double, or triple strand designs, to accommodate different load requirements and rigging setups.
  • Safety Considerations: When using heavy-duty chains for lifting and rigging, it is essential to follow industry safety standards and guidelines to ensure the safety of personnel and equipment.

Heavy-duty chains find applications in industries such as construction, manufacturing, mining, and offshore operations. They are commonly used in cranes, winches, hoists, and other lifting devices to move and position heavy objects safely and efficiently.

When selecting heavy-duty chains for lifting and rigging applications, it is crucial to consider factors such as the working load limit (WLL), chain size, and compatibility with the lifting equipment. Regular inspection and maintenance are also essential to ensure the chains remain in good working condition and can perform reliably in heavy-duty lifting and rigging operations.

heavy duty chain

How does a heavy-duty chain differ from a standard chain in terms of design and strength?

A heavy-duty chain differs from a standard chain in several aspects of design and strength. Here are the key differences:

1. Design: The design of a heavy-duty chain is specifically engineered to handle heavy loads and harsh conditions. It typically has larger and thicker components, including plates, pins, and rollers, compared to a standard chain.

2. Material: Heavy-duty chains are usually made from high-quality materials such as alloy steel, stainless steel, or carbon steel with higher tensile strength and better resistance to wear and fatigue. In contrast, standard chains may use more basic materials with lower strength.

3. Strength: Heavy-duty chains are designed to withstand significantly higher loads and forces than standard chains. They are built to handle heavy impact loads and extreme conditions without failure.

4. Durability: Due to their robust construction and high-quality materials, heavy-duty chains offer superior durability and longevity compared to standard chains. They can endure repeated use and demanding applications without premature wear or stretching.

5. Application: Heavy-duty chains are commonly used in industries and applications that involve heavy machinery, large equipment, and extreme operating conditions. They are ideal for applications where standard chains may not be sufficient to handle the load or endure the environment.

6. Safety Margin: Heavy-duty chains often have a higher safety margin, which means they are designed to operate well below their maximum load capacity. This safety margin ensures added safety and prevents chain failure even during unexpected overloads.

7. Price: Given their more robust construction and higher-quality materials, heavy-duty chains are typically more expensive than standard chains.

In summary, heavy-duty chains are engineered for heavy-duty applications, offering greater strength, durability, and safety compared to standard chains. They are the preferred choice for industries that require reliable and high-performance chain systems to handle challenging and high-load situations.

China wholesaler Drive chain conveyor drives standard pitch industrial heavy-duty carbon steel roller chains  China wholesaler Drive chain conveyor drives standard pitch industrial heavy-duty carbon steel roller chains
editor by CX 2023-11-28

China Standard Heavy Duty Series Roller Chains Conveyor Chain Driving Chain

Product Description

Heavy Duty Series Roller Chains  Conveyor Chain Driving Chain
Material: Alloy Steel
Surface Treatment: Shot Peening / Blacking / Blueing

Main Application: Idustry machinery
ANSI CHAIN NO.(A SERIES):35H-1  40H-1  50H-1  60H-1  80H-1  100H-1  120H-1  140H-1  160H-1  200H-1  240H-1  60H-2  80H-2  100H-2  120H-2  140H-2  160H-2  200H-2  60H-3  80H-3  100H-3  120H-3  140H-3  160H-3  200H-3

ANSI CHAIN NO.(B SERIES):04BH  06BH  08BH  10BH  12BH  12BV  12BHF2  16BH  24BH  24BHF2

FAQ:

1. Are you manufacturer or trade Company?

We are a factory founded in 1991 with trade team for international service.

2. What terms of payment you usually use?
T/T 30% deposit and 70% against document, Western Union, L/C at sight

 

3. what is your lead time for your goods?
Normally 45 days after confirmed order. 30 days could be available in low season for some items (during May to July), and 65 days during new year and hot season ( Jan to March).

 

4. Do you attend any Show?
We attend Hannover show in Germany, NMW in Austrilia, Canton fair, PTC, in China and many other special furniture shows.

Usage: Transmission Chain, Transportation Chain
Material: Alloy
Surface Treatment: Heat Treatment
Feature: Heat Resistant
Chain Size:   Custom Made
Structure:   Custom Made
Customization:
Available

|

Customized Request

heavy duty chain

How do heavy-duty chains perform in continuous and intensive operations?

Heavy-duty chains are specifically designed to excel in continuous and intensive operations. These chains are constructed using high-quality materials and precision engineering, making them capable of withstanding heavy loads, shock forces, and continuous use without compromising their performance.

Here are some key factors that contribute to the excellent performance of heavy-duty chains in continuous and intensive operations:

  1. Strength and Durability: Heavy-duty chains are made from materials such as alloy steel, which provides exceptional strength and durability. This enables them to handle the repetitive stresses of continuous use without stretching or deforming.
  2. Heat Treatment: Heavy-duty chains undergo specialized heat treatment processes that enhance their hardness and wear resistance. This heat treatment ensures that the chains can maintain their integrity and performance even under high operating temperatures.
  3. Lubrication: Proper lubrication is essential for heavy-duty chains operating continuously. Lubrication reduces friction between chain components, minimizes wear, and dissipates heat generated during operation.
  4. Robust Design: Heavy-duty chains feature robust and precise designs that optimize their performance. The design includes factors such as pitch, roller diameter, and plate thickness, which are tailored to withstand heavy loads and provide efficient power transmission.
  5. Quality Manufacturing: Heavy-duty chains are manufactured to stringent quality standards, ensuring uniformity and consistency across the chain’s length. This precision manufacturing guarantees that each link is capable of handling the same amount of load.

Due to these features, heavy-duty chains can endure continuous use in demanding applications like mining, construction, and heavy machinery. They provide reliable and consistent performance, reducing downtime and maintenance costs in intensive operations.

heavy duty chain

Can heavy-duty chains be used in power transmission for renewable energy applications?

Yes, heavy-duty chains can be used in power transmission for renewable energy applications. Renewable energy sources such as wind and solar power often require large and robust mechanical systems to convert the energy generated into usable electricity.

Heavy-duty chains play a vital role in these power transmission systems, especially in wind turbines and solar tracking systems. Here’s how heavy-duty chains are utilized in these renewable energy applications:

  • Wind Turbines: Heavy-duty chains are commonly used in the pitch control mechanism of wind turbines. The pitch control system adjusts the angle of the turbine blades to optimize their aerodynamic performance. The chains in this system must be able to withstand high loads and cyclic stresses as they operate under varying wind conditions. Additionally, chains are used in the yaw drive system, enabling the turbine to turn and face the wind.
  • Solar Tracking Systems: Solar panels in solar farms are often mounted on tracking systems that follow the sun’s path to maximize energy capture. Heavy-duty chains are employed in these tracking systems to ensure precise and reliable movement of the solar panels throughout the day. The chains must be durable and resistant to environmental factors to endure long-term outdoor use.
  • Hydropower: In hydropower plants, heavy-duty chains are used in various applications, including opening and closing dam gates, controlling water flow, and operating large water turbine systems. These chains must be capable of withstanding the high forces generated by the water flow.

Heavy-duty chains are preferred in these renewable energy applications due to their strength, reliability, and ability to handle heavy loads and high-stress conditions. Regular maintenance is essential to ensure the chains’ optimal performance and to avoid downtime in power generation operations.

In summary, heavy-duty chains are integral components in power transmission systems for renewable energy applications, contributing to the efficient and sustainable generation of clean energy.

heavy duty chain

What are the common types of heavy-duty chains used in industrial equipment?

Heavy-duty chains find various applications in industrial equipment where strength, durability, and reliability are crucial. Some of the common types of heavy-duty chains used in industrial machinery include:

  • Roller Chains: Roller chains are one of the most prevalent types of heavy-duty chains used in industrial machinery. They consist of cylindrical rollers that engage with the sprockets to transmit power and motion. Roller chains are widely used in conveyors, agricultural machinery, construction equipment, and material handling systems.
  • Drag Chains: Drag chains, also known as cable carriers or energy chains, are designed to protect and guide moving cables and hoses in various industrial applications. They are commonly used in robotic systems, CNC machines, and other equipment that require consistent cable management.
  • Engineering Class Chains: Engineering class chains are heavy-duty chains designed for demanding applications in industries like mining, forestry, and agriculture. They are used in conveyors, elevators, and other equipment that require heavy-load handling.
  • Leaf Chains: Leaf chains are used in forklift trucks, scissor lifts, and other lifting applications. They consist of interconnected plates (leaves) with pins to provide excellent tensile strength and resistance to fatigue.
  • Dragline Chains: Dragline chains are specifically used in dragline excavators and similar equipment for mining and heavy earthmoving operations. They are designed to handle extremely heavy loads and harsh conditions.
  • Bucket Elevator Chains: Bucket elevator chains are used in bucket elevators to vertically convey bulk materials like grains, fertilizers, and other granular materials. They are designed to endure the vertical lifting forces and abrasive materials.

These are just a few examples of the common types of heavy-duty chains used in industrial equipment. Each type of chain is designed to meet specific application requirements, and selecting the right chain depends on factors like load capacity, speed, environment, and the type of machinery involved.

China Standard Heavy Duty Series Roller Chains Conveyor Chain Driving Chain  China Standard Heavy Duty Series Roller Chains Conveyor Chain Driving Chain
editor by CX 2023-11-06

China high quality Heavy Duty Series Roller Chains Conveyor Chain Driving Chain

Product Description

Heavy Duty Series Roller Chains  Conveyor Chain Driving Chain
Material: Alloy Steel
Surface Treatment: Shot Peening / Blacking / Blueing

Main Application: Idustry machinery
ANSI CHAIN NO.(A SERIES):35H-1  40H-1  50H-1  60H-1  80H-1  100H-1  120H-1  140H-1  160H-1  200H-1  240H-1  60H-2  80H-2  100H-2  120H-2  140H-2  160H-2  200H-2  60H-3  80H-3  100H-3  120H-3  140H-3  160H-3  200H-3

ANSI CHAIN NO.(B SERIES):04BH  06BH  08BH  10BH  12BH  12BV  12BHF2  16BH  24BH  24BHF2

FAQ:

1. Are you manufacturer or trade Company?

We are a factory founded in 1991 with trade team for international service.

2. What terms of payment you usually use?
T/T 30% deposit and 70% against document, Western Union, L/C at sight

 

3. what is your lead time for your goods?
Normally 45 days after confirmed order. 30 days could be available in low season for some items (during May to July), and 65 days during new year and hot season ( Jan to March).

 

4. Do you attend any Show?
We attend Hannover show in Germany, NMW in Austrilia, Canton fair, PTC, in China and many other special furniture shows.

Usage: Transmission Chain, Transportation Chain
Material: Alloy
Surface Treatment: Heat Treatment
Feature: Heat Resistant
Chain Size:   Custom Made
Structure:   Custom Made
Customization:
Available

|

Customized Request

heavy duty chain

What are the benefits of using a heavy-duty chain over other chain types?

Heavy-duty chains offer several advantages over other chain types, making them a preferred choice in various industrial applications:

  • High Strength: Heavy-duty chains are specifically designed to handle heavy loads and high forces, making them ideal for applications that require superior strength and durability.
  • Robustness: These chains are constructed from tough materials and undergo rigorous manufacturing processes, ensuring they can withstand harsh operating conditions and resist wear and tear over extended periods.
  • Reliability: The robust design and high-quality materials used in heavy-duty chains result in reliable performance, reducing the risk of chain failure and equipment downtime.
  • Wide Range of Sizes: Heavy-duty chains are available in various sizes and configurations to accommodate different applications and equipment requirements, offering versatility in their usage.
  • Compatibility: They can be used with a wide range of sprockets or pulleys, providing flexibility in designing mechanical systems and power transmission setups.
  • Reduced Stretch: Heavy-duty chains exhibit minimal elongation or stretch during operation, maintaining consistent power transmission and precise positioning in machinery.
  • Resistance to Corrosion: Some heavy-duty chains are made from corrosion-resistant materials, making them suitable for use in challenging environments such as marine, outdoor, or high-moisture settings.
  • Long Service Life: Due to their strength and durability, heavy-duty chains generally have a longer service life compared to standard chains, leading to cost savings over time.

Overall, heavy-duty chains are an excellent choice in demanding industrial applications where reliable performance, strength, and longevity are crucial factors. Their ability to handle heavy loads, resist wear and corrosion, and maintain precision makes them indispensable in various industries, including construction, mining, agriculture, marine, and material handling.

heavy duty chain

What are the temperature limits for heavy-duty chains in extreme environments?

Heavy-duty chains are designed to perform well in a wide range of temperatures, but their temperature limits in extreme environments depend on the materials they are made from and the specific application.

Generally, heavy-duty chains can handle temperatures ranging from -20°C to 200°C (-4°F to 392°F) in standard operating conditions. However, in extreme environments, such as foundries, steel mills, or extremely cold regions, special high-temperature or low-temperature chains may be required.

For high-temperature applications, heavy-duty chains made from heat-resistant materials, such as alloy steels or stainless steels, can withstand temperatures above 200°C (392°F) without losing their structural integrity.

On the other hand, in extremely cold environments, heavy-duty chains made from low-temperature materials, like specific grades of carbon steel or nickel-plated chains, can maintain their strength and flexibility at temperatures as low as -40°C (-40°F) and even lower.

When operating heavy-duty chains in extreme environments, it is essential to consider factors such as thermal expansion, contraction, and possible lubrication challenges. Adequate lubrication is crucial to ensure smooth operation and to protect the chains from wear and corrosion caused by temperature variations.

In critical applications with extreme temperature conditions, consulting with chain manufacturers or industry experts can help determine the most suitable heavy-duty chain materials and configurations for the specific environment to ensure optimal performance and longevity.

heavy duty chain

What is a heavy-duty chain and what are its applications in various industries?

A heavy-duty chain is a type of chain designed to withstand high loads, severe conditions, and challenging environments. It is constructed using strong and durable materials, making it suitable for applications that require robust and reliable performance. Here are the details of heavy-duty chain and its applications in various industries:

Definition: A heavy-duty chain is characterized by its larger and stronger components compared to standard chains. It is commonly made from materials such as alloy steel, stainless steel, or carbon steel, and is designed to handle heavy loads, high impact forces, and resistance to wear and fatigue.

Applications: 1. Construction and Infrastructure: Heavy-duty chains are extensively used in construction equipment, including excavators, bulldozers, and cranes. They play a vital role in lifting, digging, and moving heavy materials on construction sites.

2. Mining and Extraction: In the mining industry, heavy-duty chains are employed in large mining equipment like draglines, loaders, and shovels. They are crucial for the extraction and transportation of minerals and ores.

3. Material Handling: Heavy-duty chains are found in various material handling applications, such as overhead cranes, hoists, and conveyor systems. They ensure the smooth and safe movement of heavy goods in industrial facilities and warehouses.

4. Agriculture: In agricultural machinery, heavy-duty chains are used in equipment like combines, tractors, and balers. They handle the stresses of harvesting, plowing, and baling operations in the field.

5. Automotive Manufacturing: Heavy-duty chains are utilized in automotive assembly lines for vehicle assembly and production processes.

6. Forestry: Chainsaw machines and logging equipment rely on heavy-duty chains for felling, bucking, and skidding trees in forestry operations.

7. Marine: Heavy-duty chains are applied in marine environments for anchor lines, mooring systems, and towing operations.

8. Aerospace: Heavy-duty chains are used in aircraft for various applications, including flight control mechanisms and landing gear.

9. Energy and Power Generation: Heavy-duty chains are used in power plants for conveying coal and biomass, as well as in wind turbines for pitch and yaw control.

10. Oil and Gas: Heavy-duty chains are employed in oil rigs and drilling equipment for the extraction of petroleum and natural gas.

Overall, heavy-duty chains are essential components in industries that require reliable, robust, and high-load bearing systems. They contribute to the smooth and efficient operation of various machinery, ensuring safety and productivity in diverse industrial applications.

China high quality Heavy Duty Series Roller Chains Conveyor Chain Driving Chain  China high quality Heavy Duty Series Roller Chains Conveyor Chain Driving Chain
editor by CX 2023-11-03

China OEM Heavy Duty Series Roller Chains Conveyor Chain Driving Chain

Product Description

Heavy Duty Series Roller Chains  Conveyor Chain Driving Chain
Material: Alloy Steel
Surface Treatment: Shot Peening / Blacking / Blueing

Main Application: Idustry machinery
ANSI CHAIN NO.(A SERIES):35H-1  40H-1  50H-1  60H-1  80H-1  100H-1  120H-1  140H-1  160H-1  200H-1  240H-1  60H-2  80H-2  100H-2  120H-2  140H-2  160H-2  200H-2  60H-3  80H-3  100H-3  120H-3  140H-3  160H-3  200H-3

ANSI CHAIN NO.(B SERIES):04BH  06BH  08BH  10BH  12BH  12BV  12BHF2  16BH  24BH  24BHF2

FAQ:

1. Are you manufacturer or trade Company?

We are a factory founded in 1991 with trade team for international service.

2. What terms of payment you usually use?
T/T 30% deposit and 70% against document, Western Union, L/C at sight

 

3. what is your lead time for your goods?
Normally 45 days after confirmed order. 30 days could be available in low season for some items (during May to July), and 65 days during new year and hot season ( Jan to March).

 

4. Do you attend any Show?
We attend Hannover show in Germany, NMW in Austrilia, Canton fair, PTC, in China and many other special furniture shows.

Usage: Transmission Chain, Transportation Chain
Material: Alloy
Surface Treatment: Heat Treatment
Feature: Heat Resistant
Chain Size:   Custom Made
Structure:   Custom Made
Customization:
Available

|

Customized Request

heavy duty chain

Can heavy-duty chains be used in automotive and transportation equipment?

Yes, heavy-duty chains can be used in various automotive and transportation equipment applications. These chains are designed to handle heavy loads and provide reliable power transmission in demanding conditions, making them suitable for a wide range of automotive and transportation-related tasks.

In automotive applications, heavy-duty chains can be found in timing systems, where they ensure precise synchronization between the engine’s camshaft and crankshaft. They are also used in transfer cases, differentials, and other drivetrain components that require robust and dependable power transmission.

Transportation equipment, such as trucks, buses, and industrial vehicles, often rely on heavy-duty chains for various functions, including suspension systems, lifting mechanisms, and steering systems. In these applications, the chains must withstand continuous use and exposure to environmental factors.

Heavy-duty chains are engineered to offer exceptional durability, high tensile strength, and resistance to wear, making them a reliable choice for automotive and transportation equipment that operates under heavy loads and challenging conditions.

heavy duty chain

What are the benefits of using a heavy-duty chain in waste management and recycling equipment?

Heavy-duty chains offer several benefits when used in waste management and recycling equipment:

  • Durability: Waste management and recycling operations involve handling heavy and abrasive materials, such as metal scraps, construction debris, and industrial waste. Heavy-duty chains are designed to withstand the demanding conditions of these environments and provide long-lasting performance.
  • High Load Capacity: Waste management and recycling equipment often require moving large and heavy loads. Heavy-duty chains have a high load-bearing capacity, making them suitable for handling substantial weights without deformation or failure.
  • Resistance to Corrosion: Waste materials and recycling processes can expose chains to corrosive substances, such as acids and chemicals. Heavy-duty chains are often made from corrosion-resistant materials, like stainless steel, to ensure they remain functional and reliable even in harsh environments.
  • Reduced Downtime: With durable and reliable heavy-duty chains, the risk of unexpected failures and downtime is minimized. This leads to increased operational efficiency and cost-effectiveness in waste management and recycling operations.
  • Enhanced Safety: Safety is paramount in waste management facilities. Heavy-duty chains, when properly installed and maintained, contribute to the safe and smooth operation of equipment, reducing the likelihood of accidents and injuries.
  • Compatibility with Various Equipment: Heavy-duty chains are versatile and can be used in various waste management and recycling equipment, such as conveyor systems, shredders, balers, and sorting machines.

In conclusion, heavy-duty chains play a crucial role in waste management and recycling equipment by providing durability, high load capacity, corrosion resistance, and enhanced safety. These chains ensure the efficient and reliable handling of heavy waste materials, contributing to the overall effectiveness of waste management and recycling processes.

heavy duty chain

What materials are heavy-duty chains typically made of to withstand heavy usage?

Heavy-duty chains are made of high-strength materials that can withstand the demanding conditions of heavy usage. The most common materials used in manufacturing heavy-duty chains include:

  • Alloy Steel: Alloy steel is a popular choice for heavy-duty chains due to its excellent strength, toughness, and wear resistance. It is well-suited for applications in industries such as construction, mining, and forestry.
  • Stainless Steel: Stainless steel heavy-duty chains offer superior corrosion resistance, making them ideal for applications in marine environments, food processing, and other industries where exposure to moisture and chemicals is a concern.
  • Carbon Steel: Carbon steel chains are more affordable than alloy steel or stainless steel, making them a practical choice for heavy-duty applications that don’t require high levels of corrosion resistance.
  • Chromium-Molybdenum Steel: This type of steel provides a balance between strength and toughness, making it suitable for heavy-duty chains used in agricultural equipment and manufacturing machinery.
  • Nickel-Plated Steel: Nickel-plated chains offer additional protection against corrosion, making them suitable for applications where exposure to harsh environments is expected.
  • Galvanized Steel: Galvanized chains are coated with a layer of zinc, which provides corrosion resistance and is commonly used in outdoor applications and marine environments.

The choice of material depends on the specific requirements of the application and the operating environment. Heavy-duty chains made from these materials can endure the stresses of heavy usage and maintain their strength and integrity over prolonged periods, ensuring the reliable performance of various industrial machinery and equipment.

China OEM Heavy Duty Series Roller Chains Conveyor Chain Driving Chain  China OEM Heavy Duty Series Roller Chains Conveyor Chain Driving Chain
editor by CX 2023-11-02

China Professional Standard Hardware Straight Side Plate Conveyor Chains Precision Industrial Roller Chain brush grubber chain

Product Description

Company Profile

-HangZhou CHOHO Industrial Co., Ltd. was founded in 1999. Has become the leader of chain system technology, the first batch of natioal recognized enterprise technology center,national technology innovation demonstration enterprise,and the first A-share listed company in China’s chain drive industry.The securities code is 003033.
-CHOHO has 4 subsidiaries, including testing technology and international trading companies. has 4 factories in HangZhou, Thailand factory, ZheJiang R&D Center and Tokyo R&D Center. In addition, CHOHO ZHangZhoug Industrial zone is expected to be completed & put into operation next year.
-We specialized in producing all kinds of standard chains and special chains, such as Agricultural Chain, Sprocket, Chain Harrow, Tillage Parts,Rice Harvester Chain, GS38 Chain, Roller Chain, Automobile Chain, Motorcycle Chain Industrial Chain and so on.Our  partners among world top enterprises, such as LOVOL,JOHN DEERE,NEW HOLLAND, CLASS,AGCO,DEUTZFAHR,HONDA, KUBOTA etc.

Production Capacity Equipment

By 2571,CHOHO has more than 2,700 sets of main production equipment and more than 600 sets of high-precision equipment,With the domestic advanced product laboratory and chain production assembly line, CHOHO has strong research and development and testing capabilities for high-end chain products.

Our Advantages

1. Any inquiry you make will be answered professionally within 6~8 hours.
2. Attaches great importance to product quality and approved by many global quality system certification,such as France, Norway, Germany.
3. Focused on Chain since 1999, have rich experience in Production.
4. High-quality workers,First-class advanced equipment,good quality control,advanced technology.
5. Be Good at Custom-Made Products, provide customized services for customers.
6. Participated in the drafting of 24 national and industrial standards such as chains.As of 2571-Mar, CHOHO has 180 authorized patents.
7. With the responsibility of “Providing high quality chain system with the same service life for the global locomotive industry”, have established a strong R&D team.

CHOHO has a natural brand awareness.  As of January 2571, CHOHO has registered the “CHOHO” trademark in more than 60 countries, including the United States, Japan, the United Kingdom, France, Germany, Russia, Spain, Austria, Belgium, Bulgaria, Croatia, Czech Republic, Denmark, Finland, Greece , Hungary, Ireland, Italy, Netherlands, Poland, Portugal, Romania, Ukraine, Sweden, Australia, Algeria, Egypt, Kenya, Morocco, South Korea, Kazakhstan, Mongolia, Syria, Thailand, Pakistan, India, Brazil, Mexico, Colombia, etc. 

Product Advantages

Certifications

CHOHO attaches great importance to product quality and approved by many global quality system certification, such as France, Norway, and Germany. Through the establishment of a sophisticated production management process and quality control system, the entire product process control is achieved. With the introduction of advanced production, processing, and testing equipment, CHOHO has internationally leading full-process quality control capabilities to provide customers with high-quality products.

Choho Provide Chain System Solutions for The Global Top 500 and The Enterprises in Various Fields Top 10!

Broad Customer Channels  Market Continues to Develop!

CHOHO has been invited to participate in domestic & international agricultural machinery exhibitions, such as Hannover Messe, Bologna Fair, Canton Fair ,VIV ASIA and so on!

Packaging & Shipping

Packaging Details: Chain+Plastic Bag+Neutral Box+Wooden case+Big Carton+Steel Pallets or Customization

FAQ

1. Are you manufacturer or trade Company?
    We are a factory focused on producing and exporting Chain over 23 years,have a professional international trade team.
2. What terms of payment you usually use?
    T/T 30% deposit and 70% against document, L/C at sight
3. What is your lead time for your goods?
    Normally 30~45 days.Stock can be shipped immediately.
4. Do you attend any Show?
    We attend Hannover show in Germany, EIMA in Italy, CZPT in France, CIAME in China and many other Agricultural machinery shows.
5.Do you offer free samples?
   Yes,we can.or you just bear the shipping cost.
6.Is OEM available?
    Yes, OEM is available. We have professional designers to help you design.

Usage: Transmission Chain, Conveyor Chain, Dedicated Special Chain, Roller Chain
Material: Stainless steel
Surface Treatment: Polishing
Feature: Heat Resistant
Chain Size: 1/2"*11/128"
Structure: Roller Chain
Samples:
US$ 0/Meter
1 Meter(Min.Order)

|
Request Sample

Customization:
Available

|

Customized Request

chain

Choosing a drive chain for a belt conveyor

The drive chain is used to move heavy objects on the conveyor chain. Chains are magnetic, antistatic, high temperature, or chemical resistant, depending on the application. These types of drive chains are used in many different industries. A common machine that uses this type of drive is a chain hoist. Chain hoists are designed to lift heavy loads with minimal effort. Chains are often used to transport heavy loads.

roller chain

Whether using a roller chain as a drive chain or a belt conveyor can be tricky. Whether it’s a small low-speed drive with manual lubrication or a high-speed pump-lubricated drive with multiple sprockets, there are several factors to consider when choosing a roller chain. First, you need to consider motor horsepower and rpm. The speed of the motor determines how much chain you need. For example, if you are using a low-speed drive, you will need to choose a low-pitch, high-pitch chain. Another thing to consider is chain length – ideally, you can go for an even number of sprockets and chains, but never go smaller.
The lubrication system is also important because the lubrication system must be able to deliver enough oil. The type of oil used to lubricate a chain depends on its operating environment, temperature and speed. Wear is caused by pressure on the bearing, angular sliding of the pins, and rotation of the rollers. There are five different types of lubrication methods available, depending on the system used. A high-quality carbon steel chain is a major advantage when operating at high temperatures, as it can withstand higher temperatures.
The materials of construction for roller chains vary by application. Typically, the most common materials are steel and stainless steel, but sometimes alloy steels are used in food processing machinery that may have lubrication problems. Nylon and brass are also sometimes used. Some industries require heavy-duty chains. If you need an extremely heavy chain, you may want to consider a heavy-duty roller chain. If you are not sure which type of chain is best for your application, consult an industry expert.
Unlike other chains, roller chains are more efficient from a size and weight perspective. While solution chains are useful in some situations, drive chains are more effective for dirty work and slipping on tracks. They are commonly used in construction and manufacturing. There are other advantages to using a drive chain. They are generally stronger than belts, which is a huge benefit. So, if you’re wondering which is better, here are them:

Multi-strand roller chain

The multi-strand roller chains for drive chains market is expected to grow at a CAGR of over 20% during the forecast period. Market reports cover product demand, supply, and cost. The report covers the global market including company profiles, product details, and contact information of key players. It also takes into account the revenue generated by different application areas. The report contains 159 pages of useful information and data. It is an essential tool for anyone involved in drive chain manufacturing.
The essential characteristics of multi-strand chains are their power ratings and allowable bearing area pressures. Power rating is an important characteristic that determines the chain’s ability to transmit a specific load. Typically, multi-strand chains are rated in the range of 12,000 watts per strand. However, their capabilities are limited by link plate fatigue, roller impact fatigue, and wear between pins and bushings.
Energy Series chains are ideal for high-speed and high shock load applications. The chain is designed to provide reliable power and withstand the rigors of the oil and gas industry. It uses high-strength steel and double-coated rolls. These chains come in different lengths and come in two types: single-strand and multi-strand. It is best to consult a professional to find out which chain best suits your needs.
The global multi-strand roller chains market is expected to grow at a CAGR of over 7% during the forecast period. From 2011 to 2019, the industry is expected to grow by nearly 6%. However, the outlook for this market is not optimistic, with some companies experiencing negative growth over the past year. Nonetheless, slowing global economic growth and tightening COVID-19 regulations are likely to hinder the market growth.
Although requirements vary by application, it must be remembered that the load on a multi-strand roller chain must not be greater than 1/9 or 1/6 of the tensile strength of the chain. If the load exceeds this threshold, the chainplates will fatigue. This is the main reason why roller chains are expensive. However, this is not always the case. Multi-strand roller chains are a great idea if you are looking for an affordable and reliable drive chain.

double chain

If you’re looking for an industrial-grade drive chain, you’ve probably considered a double chain. The chain meshes with the sprockets on either side of the gears. It comes in different styles, each with its own advantages and disadvantages. The CZPT duplex series has twice the power capacity of standard SC duplex chains. This type of chain is usually best for new applications. On the other hand, SC double chain chains are the cheapest but have less weight and power capacity.
Another option is a triple drive chain. This type of drive chain has an additional row of plates and contains three sprockets. Its unique design reduces the weight and impact velocity of the timing chain. It is usually used in automotive applications. It is ideal for low to medium-load timing applications. It is also available in acoustically optimized versions. Three-quarter inch pitch double chain chains are widely used in gasoline engine aids and timing drives.
chain

flat top chain

High friction rubber is usually installed on the top or bottom of a flat top drive chain to improve its high friction surface and prevent interference during side bend conveying. The chain plate can be customized with thin rubber layer or thick elastic polyurethane rubber according to customer requirements. In addition to providing high friction, the flat top chain also provides excellent anti-slip properties for glass bottles.
Premium steel flat top chain with high quality surface finish and excellent wear resistance. They have a high level of noise reduction and can be used in heavy duty conveying applications. These chains are available in a variety of alloys such as stainless steel or aluminum. Some models are designed to be very rugged and last longer. Aluminum and galvanized steel chains are popular choices for these chains.
Flat Top Drive Chain Conveyors are versatile and come in an endless combination of configurations. Drives can be connected end-to-end to form long conveyor lines, while side-curved flat-top chains are versatile enough to handle tandem, serpentine or carousel configurations. Standard and heavy duty models are also available. Flat top chains can be used in many different applications including food, beverages and other commodities.
Standard flat top chains are usually rectangular or L-shaped and designed for use on straight conveyors. In some cases, space constraints may require a U-shaped or rectangular conveyor line. For smoother conveying, side-curved flat-top chains can be used. These chains are paired with regular rectangular chain plates and tall pins for high load capacity. They come in different widths, including multi-strand chains.

China Professional Standard Hardware Straight Side Plate Conveyor Chains Precision Industrial Roller Chain   brush grubber chainChina Professional Standard Hardware Straight Side Plate Conveyor Chains Precision Industrial Roller Chain   brush grubber chain
editor by CX 2023-06-01

China Good quality Car Chains Snow Chains Tire Chains roller chain conveyor

Product Description

CZPT tire chains pattern in sures a comfortable drive with less vibration and noise,
Masimum traction with ninimal brake distance and skidding,
The small square links and the short length of each cross chain minimizes wear and breakage,
Easily operated chain tensioning system,
Fitted in minutes,wthout the need to jack up,or move the car,
Unique “D” type square link design,gaining excellent traction,
Flexible steel cable covered with plastic sheath,
Thermal treated electro-galvanised chains,
Elegant and strong plastic case,safe and convenient,spacesaving,
Comes complete with installation instructions,repair links 1 pair/case.

After-sales Service: Replacement, Credit
Warranty: 1 Year
Material: Steel
Usage: Car Chains
Manufacturing Process: Weld Chain
Transport Package: Crate
Samples:
US$ 25/Pair
1 Pair(Min.Order)

|
Request Sample

chain

Advantages and Disadvantages of Drive Chains

Drive chains are widely used for sliding steel guides. While solution chains are often used, roller chains are more efficient in size and weight. Nevertheless, a drive chain is often the best choice for dirty jobs. The following are some of the benefits and disadvantages of drive chains. Learn more! Adapt your vehicle to your specific situation with drive chains. You’ll be glad you did! Read on to learn more! Continue reading for information on different types of drive chains.

Inverted tooth chain

An inverted tooth camshaft drive chain has teeth on its links and two pin rolling pivot joints that engage each other to transmit moderate to high-speed rotations. This type of drive chain is also known as a silent chain drive, which is particularly effective in reducing noise and vibration. The teeth on the links mesh perfectly with the teeth of the gear sprocket. The inverted tooth design also provides smooth communication of chain links with the teeth of the sprocket.
The design of the new model was particularly effective in quelling noise. The “Druid” spring forks enabled the chain to adjust with minimal motion of the axle. It was launched at the 1910 Olympia show and sold more than 500 units. The drive chain was also silent, which reduced the need for sound insulation and attenuation components, which in turn minimized weight. Hence, it became an ideal choice for wind turbines.
The main disadvantages of chain drive include its low speed and limited range. It is expensive to manufacture and requires precise mounting. Maintenance is essential, including lubrication and slack adjustment. Its velocity fluctuates as the chain is stretched. This causes the chain to fail at the worst possible time. The chain drive also has problems associated with slippage. In addition, it can be prone to excessive wear and tear. Fortunately, however, there are newer types of drive chains available, which are more durable and reliable.

Duplex chain

There are three types of duplex drive chains: SC, RP, and Ramsey. Each has their own unique advantages and features. The Rampower duplex series offers twice the power capacity of the standard SC duplex chain. They are often used in new applications. SC duplex chains are the most affordable and are used in less demanding applications. The SC duplex chain has a lower power capacity but lower weight. There is also no guarantee of performance.

Multi-strand roller chain

The Multiple-strand roller chain for drive chain market can be defined on the basis of the factors that drive growth in this industry. The factors that hamper market growth can be understood in order to come up with alternative bends for lucrative opportunities. This report aims to understand the current scenario and the impact of COVID-19 on the industry as a whole. We will also discuss the market drivers and restraints. We will discuss the various types of Multiple-strand roller chains for drive chain and their market sizes in the coming years.
The minimum tensile strength for a roller chain is one sixth or one-ninth the tensile strength of a conventional drive chain. These standards are established to prevent linkplate fatigue, which is the main cause of premature breakdown. A chain made of this material is considered a superior choice for high-performance applications involving a high load-bearing capacity. If you’re using a drive chain, make sure to choose a proper chain based on the type of application. A simple chain with a high load-bearing capacity is also ideal for simple applications.
While it is true that a high-tension, high-speed drive requires a higher power rating than a low-speed chain, roller chains are primarily used in low to mid-speed applications. They are similar to bicycle chains but may have a master link. In motorcycles, chains are heavier and may require a chain tool to remove. These chains are often replaced with toothed belts or a combination of both.

Flat top chain

The flat top drive chain is a versatile conveyor belt that conveys medium and large workpiece pallets. Its arcing capacity makes it suitable for continuous drive combinations involving curve arcs. The flat top chain is also available with PA wear pads on the workpiece pallets. The flat top chain’s steel and plastic glide profiles allow surface loads of up to 1.5 kg/cm. HD profiles are compatible with the flat top chain.
The steel flat top chain is available in several types: 815, 820, and 881 series. These are heat-treated to have high strength and excellent wear resistance. They can also be used with various sprockets, including 820 sprockets. The high-quality steel chain can be used with many industrial applications. However, if you are looking for a durable chain for your industrial application, iwis hardened stainless steel flat top chains are an excellent choice.
TSplus flat top drive chain offers the most flexibility of any conveying media. The drive units can be linked end-to-end to form extended conveyor lines. Side-flexing flat top chains are available to create serpentine, in-line, and carousel conveyors. Drive units are available in standard and heavy-duty models. They are versatile enough to handle a variety of container sizes. If you need a more complex conveyor system, you can choose a heavy-duty drive chain.
Rexnord flat top chains come in two basic styles: MatTop chain and TableTop chain. The TableTop chain is molded in standard widths ranging from 3.25 inches to 12 inches. These are shipped in ten-foot sections, but you can also find 20-foot-wide mattop chains. You can even customize your MatTop chain to meet your exact needs. They are perfect for a variety of conveying applications, from general conveying to wash down applications.
chain

Conveyor chain

Drive chains for conveyors come in a variety of styles. These chains can have varying degrees of pitch. Pitch is governed by wheel tooth strength, the overall chain rigidity, and the type of drive motor. A normal maximum pitch is determined by the width of the link plates and the angle between the mounting angles. You can increase the pitch of your chain by strengthening the bushes between the link plates. Make sure that the gap between the wheel teeth and the bushes is approximately one-fourth inch.
Pitch and tension of the chain are important considerations when choosing a chain. The minimum pitch is determined by the thickness of the tooth on the wheel and the maximum pitch is determined by the rigidity of the link plates. However, this maximum pitch may be exceeded with bushes between the link plates or clearance with the wheel teeth. A good quality chain will have bearing surfaces lubricated to prevent excessive wear and rust. Medium-viscosity mineral oil is suitable for normal operating conditions. SAE 20W-50 is a good choice for this application. Self-lubricating chains are available from many chain manufacturers.
The chain is usually lubricated by dripping oil between the links. This type of lubrication requires regular inspection of the conveyor chain. The amount of oil should be enough to prevent reddish brown discoloration on the chain joints. A lubricating oil should be applied on a daily basis, according to the manufacturer’s specifications. In order to ensure a longer life for your drive chain, make sure that you lubricate it on a regular basis.

China Good quality Car Chains Snow Chains Tire Chains   roller chain conveyorChina Good quality Car Chains Snow Chains Tire Chains   roller chain conveyor
editor by CX 2023-05-18

China Roller Chains X458 Drive Chain Steel Forging Chain and Industry Transmission Conveyor Drag Standard Chain with Forged Link Cast Carbon Steel Chain bush chain vs roller chain

Product Description

About Factory 

With far more than 18 years’ histiory, we are a professinal maker for fall solid products these kinds of as solid chain (X348 X458 X658 X678 X698 F100 F160), scraper chain (10160, 14218, 14226, 142N), conveyor trolley (X348, X458, X678, XT160), and drive chain (X348, X458, X678), and so forth normal moulds of chain. 

Apart from, we can also create as for each your drawing or sample, particular link chain, pusher, pin and plate, according to customers’ exclusive requirements.

Product Description

1) Content: Alloy metal, 40Cr, 42CrMo and so on.
two) Sorts: Regular sorts, X348 X458 X678, and so on. (Or as per your drawing)
3) Process: Moulding→Forging→Polishing & Blasting→Fine machining→Heat treatment→Blasting→Inspecting & testing→Packing

Merchandise Demonstrate
 

Specialized Information
 

Product Dimension Excess weight (Kg) Content Hardness Functioning Load (KN) Restrict Load (KN)
P T C S F R D
10160B one zero one.6 24 36 13 14 six fourteen .32 20CrMnTi Floor HRC56-64°    
Depth .6-1.2mm
eighteen 100
10160 one hundred and one.6 30 36 thirteen 14.5 nine fourteen .36 20CrMnTi Floor HRC56-64°     Depth .6-1.2mm 21.6 a hundred and twenty
14218 142 forty two fifty 19 twenty.5 11 25 one.fifteen 20CrMnTi Surface area HRC56-64°     Depth .6-1.2mm forty eight.six 270
14226 142 62 50 28 30 15 25 1.75 20CrMnTi Surface area HRC56-64°     Depth .6-1.2mm sixty one.two 340
2571 200 sixty six sixty 30 32 18 30 two.eight 20CrMnTi Surface area HRC56-64°     Depth .6-1.2mm seventy two four hundred
26014 260 70 75 31 33 twenty 34 five.two 20CrMnTi Area HRC56-64°     Depth .6-1.2mm one hundred thirty five 750
142N 142 forty three 50 19 22 12.5 twenty five one.2 40Cr Quench HRC36-44° 75.6 420
150D 142 42 50 19 twenty.5 11 twenty five 1.15 40Cr Quench HRC36-44° seventy five.6 420
MG20 two hundred 70 fifty 27 29 seventeen 35 3.seventy eight 40Cr Quench HRC36-44° 144 800
MG20B 200 70 fifty 27 29 17 thirty 3.eighty two 40Cr Quench HRC36-44° a hundred and forty.four 780
MG20C 200 70 fifty 27 29 17 28 3.85 40Cr Quench HRC36-44° 122.four 680
MS32 200 forty two 50 20 22 12 25 one.4 40Cr Quench HRC36-44° 75.six 420
MS55 two hundred 80 70 35 38 25 28 four.36 40Cr Quench HRC36-44° 138.6 770
3006 two hundred 65 70 30 33 24 32 three.6 40Cr Quench HRC36-44° a hundred and sixty.2 890
MS63 250 70 80 thirty 33 20 32 four.ninety three 40Cr Quench HRC36-44° 147.6 820
S16 one hundred 30 27 fifteen 16 8 fourteen .three 40Cr Quench HRC36-44° 16 88
S20 125 34 33 17 18 8 seventeen .37 40Cr Quench HRC36-44° 19.4 108
S25 a hundred and sixty 48 39 23 twenty five 13 twenty 1.28 40Cr Quench HRC36-44° fifty five.8 310
S30 142 forty six 49 22 23.5 14 twenty five one.three 40Cr Quench HRC36-44° 91.eight 510
Z16 one hundred forty 35 eighteen twenty twelve seventeen .four 40Cr Quench HRC36-44° 32.4 180
Z20 one hundred twenty five 50 forty six 24 26 15 20 .sixty seven 40Cr Quench HRC36-44° fifty nine.four 330
Z20D 125 52 60 24 26 16 26 one.fifteen 40Cr Quench HRC36-44° eighty two.eight 460
Z25 one hundred sixty 58 55 28 thirty 18 twenty five 2.25 40Cr Quench HRC36-44° eighty two.8 460
Z25D a hundred and sixty sixty six sixty four 29 31 22 28 two.6 40Cr Quench HRC36-44° 120.6 670
Z30 142 64 50 29 30.5 18 twenty five 1.8 40Cr Quench HRC36-44° 111.6 620

Merchandise & Testing Equipments
 

Items Application


Packing & Delivery
 

Why Choose Us?

one. We are engaged in chain sector in excess of 15 a long time with abundant market place expertise. We maintain enhancing creation tactics. All the goods have lengthier working existence and have handed the marketplace examination.

two. We can design the correct chains with high good quality content, good abrasion resistance, very good corrosion, higher improve and and so forth as for every your request or the chain software.

3. We are the chain producer you can straight purchase the solution from us with low price tag and large quality.

four. We have a specialist team for worldwide trade, they have ample ordeals and are always all set to remedy troubles for customers. So you have absolutely nothing to fret about.

five. We have the lengthy-time period cooperative forwarder who can give us the least expensive freight. And it can help you to save the freight. What is much more, for the FCL, we will style the offers as for every the container dimensions with the biggest potential to save the shipping and delivery expense for the two of us.

 

Standard or Nonstandard: Standard
Application: Textile Machinery, Garment Machinery, Conveyer Equipment, Packaging Machinery, Electric Cars, Motorcycle, Food Machinery, Mining Equipment, Agricultural Machinery, Coating, Spraying, Mining, Slaughtering, Assembly
Surface Treatment: Polishing
Structure: Combined Chain
Material: Alloy
Type: Cranked Link Chain

###

Samples:
US$ 5/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

Model Dimension Weight (Kg) Material Hardness Working Load (KN) Limit Load (KN)
P T C S F R D
10160B 101.6 24 36 13 14 6 14 0.32 20CrMnTi Surface HRC56-64°    
Depth 0.6-1.2mm
18 100
10160 101.6 30 36 13 14.5 9 14 0.36 20CrMnTi Surface HRC56-64°     Depth 0.6-1.2mm 21.6 120
14218 142 42 50 19 20.5 11 25 1.15 20CrMnTi Surface HRC56-64°     Depth 0.6-1.2mm 48.6 270
14226 142 62 50 28 30 15 25 1.75 20CrMnTi Surface HRC56-64°     Depth 0.6-1.2mm 61.2 340
20028 200 66 60 30 32 18 30 2.8 20CrMnTi Surface HRC56-64°     Depth 0.6-1.2mm 72 400
26014 260 70 75 31 33 20 34 5.2 20CrMnTi Surface HRC56-64°     Depth 0.6-1.2mm 135 750
142N 142 43 50 19 22 12.5 25 1.2 40Cr Quench HRC36-44° 75.6 420
150D 142 42 50 19 20.5 11 25 1.15 40Cr Quench HRC36-44° 75.6 420
MG20 200 70 50 27 29 17 35 3.78 40Cr Quench HRC36-44° 144 800
MG20B 200 70 50 27 29 17 30 3.82 40Cr Quench HRC36-44° 140.4 780
MG20C 200 70 50 27 29 17 28 3.85 40Cr Quench HRC36-44° 122.4 680
MS32 200 42 50 20 22 12 25 1.4 40Cr Quench HRC36-44° 75.6 420
MS55 200 80 70 35 38 25 28 4.36 40Cr Quench HRC36-44° 138.6 770
3006 200 65 70 30 33 24 32 3.6 40Cr Quench HRC36-44° 160.2 890
MS63 250 70 80 30 33 20 32 4.93 40Cr Quench HRC36-44° 147.6 820
S16 100 30 27 15 16 8 14 0.3 40Cr Quench HRC36-44° 16 88
S20 125 34 33 17 18 8 17 0.37 40Cr Quench HRC36-44° 19.4 108
S25 160 48 39 23 25 13 20 1.28 40Cr Quench HRC36-44° 55.8 310
S30 142 46 49 22 23.5 14 25 1.3 40Cr Quench HRC36-44° 91.8 510
Z16 100 40 35 18 20 12 17 0.4 40Cr Quench HRC36-44° 32.4 180
Z20 125 50 46 24 26 15 20 0.67 40Cr Quench HRC36-44° 59.4 330
Z20D 125 52 60 24 26 16 26 1.15 40Cr Quench HRC36-44° 82.8 460
Z25 160 58 55 28 30 18 25 2.25 40Cr Quench HRC36-44° 82.8 460
Z25D 160 66 64 29 31 22 28 2.6 40Cr Quench HRC36-44° 120.6 670
Z30 142 64 50 29 30.5 18 25 1.8 40Cr Quench HRC36-44° 111.6 620
Standard or Nonstandard: Standard
Application: Textile Machinery, Garment Machinery, Conveyer Equipment, Packaging Machinery, Electric Cars, Motorcycle, Food Machinery, Mining Equipment, Agricultural Machinery, Coating, Spraying, Mining, Slaughtering, Assembly
Surface Treatment: Polishing
Structure: Combined Chain
Material: Alloy
Type: Cranked Link Chain

###

Samples:
US$ 5/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

Model Dimension Weight (Kg) Material Hardness Working Load (KN) Limit Load (KN)
P T C S F R D
10160B 101.6 24 36 13 14 6 14 0.32 20CrMnTi Surface HRC56-64°    
Depth 0.6-1.2mm
18 100
10160 101.6 30 36 13 14.5 9 14 0.36 20CrMnTi Surface HRC56-64°     Depth 0.6-1.2mm 21.6 120
14218 142 42 50 19 20.5 11 25 1.15 20CrMnTi Surface HRC56-64°     Depth 0.6-1.2mm 48.6 270
14226 142 62 50 28 30 15 25 1.75 20CrMnTi Surface HRC56-64°     Depth 0.6-1.2mm 61.2 340
20028 200 66 60 30 32 18 30 2.8 20CrMnTi Surface HRC56-64°     Depth 0.6-1.2mm 72 400
26014 260 70 75 31 33 20 34 5.2 20CrMnTi Surface HRC56-64°     Depth 0.6-1.2mm 135 750
142N 142 43 50 19 22 12.5 25 1.2 40Cr Quench HRC36-44° 75.6 420
150D 142 42 50 19 20.5 11 25 1.15 40Cr Quench HRC36-44° 75.6 420
MG20 200 70 50 27 29 17 35 3.78 40Cr Quench HRC36-44° 144 800
MG20B 200 70 50 27 29 17 30 3.82 40Cr Quench HRC36-44° 140.4 780
MG20C 200 70 50 27 29 17 28 3.85 40Cr Quench HRC36-44° 122.4 680
MS32 200 42 50 20 22 12 25 1.4 40Cr Quench HRC36-44° 75.6 420
MS55 200 80 70 35 38 25 28 4.36 40Cr Quench HRC36-44° 138.6 770
3006 200 65 70 30 33 24 32 3.6 40Cr Quench HRC36-44° 160.2 890
MS63 250 70 80 30 33 20 32 4.93 40Cr Quench HRC36-44° 147.6 820
S16 100 30 27 15 16 8 14 0.3 40Cr Quench HRC36-44° 16 88
S20 125 34 33 17 18 8 17 0.37 40Cr Quench HRC36-44° 19.4 108
S25 160 48 39 23 25 13 20 1.28 40Cr Quench HRC36-44° 55.8 310
S30 142 46 49 22 23.5 14 25 1.3 40Cr Quench HRC36-44° 91.8 510
Z16 100 40 35 18 20 12 17 0.4 40Cr Quench HRC36-44° 32.4 180
Z20 125 50 46 24 26 15 20 0.67 40Cr Quench HRC36-44° 59.4 330
Z20D 125 52 60 24 26 16 26 1.15 40Cr Quench HRC36-44° 82.8 460
Z25 160 58 55 28 30 18 25 2.25 40Cr Quench HRC36-44° 82.8 460
Z25D 160 66 64 29 31 22 28 2.6 40Cr Quench HRC36-44° 120.6 670
Z30 142 64 50 29 30.5 18 25 1.8 40Cr Quench HRC36-44° 111.6 620

Roller Chain Basics

Before choosing the right roller chain for your machine, it is necessary to learn some basics. Learn about sprockets, tensile strength, pitch, and width. Read this article to learn more. It will help you make an informed decision. Getting the right product is critical, but it’s not always as simple as choosing a brand name. You need to choose a company that supports its products and provides good service.
chain

Roller sprocket

If you are planning to purchase roller sprockets for your application, you should first look at the various types available. Sprockets available for single-strand roller chains are manufactured by Boston Steel – Type B sprockets are drilled to size. They are available in 1/4, 3/8, 1/2, 5/8, 3/4 and 1″ pitch sizes.
The diameter of the sprocket is important when choosing the right sprocket for your application. Using a caliper to measure the diameter of a toothless plate is a good way to determine the exact size of the sprocket. A caliper is the diameter of a plate without teeth. On Type B and C sprockets, the hub diameter measures the thickness of the hub.
Another type of sprocket is the steel split sprocket, which is split in diameter. This type is easy to install and remove, and is held together by bolts in the hub. Typically, split sprockets have chain pitches ranging from 40 to 240 and bores ranging from 3/4″ to 6″. The split sprockets are designed with one pointing towards the ceiling and the other two parallel to the floor.
When shopping for sprockets, it is important to remember that they are designed specifically for a specific chain. All chains are manufactured to specific standards. In the United States, the most common standard is ANSI. The chain pitch is the distance between the center of each pin and the center of the next pin. In the US, the standard is always measured in eight-inch intervals.
In addition to sprocket size, sprocket pitch and the surface area also affect chain life. Unlike belt sprockets, which are made of forged steel, the teeth on roller sprockets are stamped from steel sheet or pressed from powdered metal. The harder the teeth, the longer the chain will last.

Roller chain pitch

The pitch of a roller chain is the distance between the sprocket and the pin. The smaller the thread pitch, the smaller the bushing wear. Generally speaking, the smaller the pitch, the longer the life of the chain. For best performance and longest life, manufacturers recommend a minimum chain pitch of 2% to 3%. Chain pitch is important to ensure proper performance, and the manufacturer recommends that you replace the chain when it reaches 2% to 3% of normal.
To determine the correct chain pitch for a particular chain, first determine the sprocket size and pitch. Pitch is the distance between pin centers, measured in 1/8 inch increments. The pin diameter of the chain is also important. If you’re not sure about the pin diameter of your chain, measure a few links to get a good average reading. Alternatively, use a caliper to measure the inside diameter of the sprocket and count the number of teeth.
When sizing a sprocket, measure the chain between the gears with a caliper and compare it to the measurements on the chain size chart. Make sure you have checked all the specs and checked the correct chain pitch. Then, choose the correct chain pitch for your needs. This is a critical step in choosing the right chain. So get the correct pitch for your roller chain. Correct pitch helps ensure maximum performance and safety.
To identify a specific type of roller chain, measure its tensile strength. This represents the amount of load the chain can withstand before breaking. Another key parameter to consider is fatigue strength. Chains with high fatigue strength are more resistant to rust and wear than chains with low fatigue strength. The numbers on the right in the standard numbering represent normal or light duty chains, while the numbers on the left represent the pitch of heavy-duty chains.
Double pitch roller chains are a variant of single pitch chains. They are manufactured according to ISO 606 and meet the same standards as single pitch chains. They are mainly used in applications with lower requirements for speed and power transmission. The plates of double pitch roller chains are also longer than single pitch chains. The double pitch drive series is also used for elevator and long conveyor drives. There are three main types of roller chains: single-pitch chains, double-pitch carriers, and oversized rollers.

Roller chain width

When buying a roller chain, one of the first decisions you must make is its width. To make this determination, you need to measure the overall width of the chain, the diameter, and the width of each roller. You must also know the height and thickness of the board. After taking these measurements, you can start shopping for the perfect roller chain. But before you buy a new chain, it’s important to know what to expect from the chain itself.
There are many different types of roller chains. These chains are available for ANSI and metric measurements. They come in single-stranded and double-stranded variants. They are usually used for power transmission. Other types include agricultural, automotive, conveyor, multi-strand, and four-strand chains. These charts also include a chart so you can easily see the exact size you need. Listed below are some of the benefits of buying a roller chain.
Roller diameter and pin diameter are important factors in choosing the correct chain width. The width of the chain is the nearest binary fraction of 5/8 of an inch. It should be at least half the thickness of the sprocket, and the plate thickness is one-eighth the width of the chain. Overweight chains are indicated with the suffix H. The pitch and width of the chain are determined by the working load and machine speed.
The outer links of the roller chain are called pin links. These pins are inserted into the bushings of the adjacent roller links. They are held in place by cotter pins. Pin links are usually pressed into the pins of heavy-duty chains. These pins are used to hold the rollers in place. However, these pin chains can reduce the power rating of roller chains by up to 20%.
The ANSI 29.1 Steel Chain Specification specifies a minimum pitch in inches and ultimate strength of 12,500 x pitch in inches. At the same time, the O-ring chain greatly reduces wear due to its lubricating effect. O-ring and X-ring chains contain a lubricant injected by vacuum when riveting the chain together. Transmission chains are tested and governed by standards bodies such as ANSI. In 2011, the American Society of Mechanical Engineers developed a standard for precision power transmission chains.
chain

Roller chain tensile strength

One of the most important indicators of roller chain strength is tensile strength. This measurement refers to the amount of load the chain can withstand before breaking. Another measure, called fatigue strength, refers to the maximum load a chain can withstand before it breaks. The strength of a roller chain depends on its size, the quality of the steel used in its construction, and the heat treatment. There are also differences in the types of shot peening used to treat steel, pitch holes, and link plates.
When choosing a roller chain, the workload is critical. This is the maximum load the chain can withstand before fatigue failure occurs. This measurement is critical because it helps determine the type of load applied to the chain. When deciding which roller chain to buy, be sure to consider the mechanical type and desired strength. Then, make sure it meets strength and load-carrying capacity requirements.
The ultimate tensile strength of a roller chain is based on the manufacturer’s recommended maximum tensile strength. However, the actual tensile strength may be higher or lower than this value. The working load limit of a roller chain can also be calculated by multiplying the chain diameter by the grade. The working load limit of a chain is the highest tension it can withstand before breaking. This value is usually expressed in points.
The maximum tensile strength of roller chains varies by chain type. The single-strand heavy chain has thick side plates for higher shock loads. Single strand heavy-duty roller chains, also known as “bushing” roller chains, are also available. Double-stranded heavy chains are structurally similar, but they have two layers of steel connected by pins that are nearly twice as strong as standard roller chains.
The tensile strength of a single-strand roller chain is approximately 500 tons. In comparison, a single-chain blockchain has a tensile strength of 900. The tensile strength of the two is similar, and it is not recommended to choose one or the other. Although steel and titanium chains are considered the strongest materials for roller chains, these materials are not magnetic.

China Roller Chains X458 Drive Chain Steel Forging Chain and Industry Transmission Conveyor Drag Standard Chain with Forged Link Cast Carbon Steel Chain     bush chain vs roller chainChina Roller Chains X458 Drive Chain Steel Forging Chain and Industry Transmission Conveyor Drag Standard Chain with Forged Link Cast Carbon Steel Chain     bush chain vs roller chain
editor by czh 2022-12-22

China wholesaler Standard Chains and Special Solid Color overhead conveyor Roller Chain with Great quality

ProductDescription

ISO16949:2009ApprovedIndustrialChain 

WhyChooseUs? 

one. HangZhouXihu (West Lake) Dis.huaChainGroupCo.,Ltdestablishedin1991,wehave5subsidiariesinchinaandhave6subsidiariesabroad
two. wecoveringaproductionareaof200,100squaremeters,havemorethan1,800setsofadvancedequipmentandover3,100highlyskilledemployees,theannualproductioncapacityhasexceeded20,000,000meters
3. wespecializedinproducingallkindsofstandardchainsandspecialchains,suchasAorBserieschains,drivingchains,conveyorchains,hoistingchains,agriculturalchains,sprockets, industrialchains, sprockets,gears,wheels andsoon
four. wehaveobtainedISO9001,ISO14001,ISO16969,AAAandAPIcertificates.

five. Ourpartnersamongworldtopenterprises,suchasJOHNDEERE,NEWHOLLAND,CLAAS,HONDA,KUBOTA,YANMAR,and so on.
 

1.IndustrialChainParts

two.Productionflowchart
1.Incomingmaterial
2.Inspection
three.Productionofchainboard(coldrollsteel/punch/heattreatment/shotblasting/cleansing)
four.Productionofroller(burrwiping& smear/heattreatment/wipinggrinding/cleansing)
five.Productionofquill(burrwiping& smear/centerlesscylindricalgrinding/heattreatment/shining)
six.Productionofshaft(cutting/chamfering/heattreatment/ centerlesscylindricalgrinding/cleaning)
7.Assembling
8.Finalinspection
nine.Packing

three.Certification


four. 
Company Information

HangZhou Xihu (West Lake) Dis.hua Chain Group Co., Ltd was founded in 1 9 9 1, and now it has five wholly owned subsidiaries, one in ZheJiang  province, other four in HangZhou, ZHangZhoug province, it is a professional manufacturer of chains, sprockets, tooth gears and various power transmission products.

 

The group has XIHU (WEST LAKE) DIS.HUA, ZIQIANG brands, is focused on producing all variety of standard roller chains and special chains, such as conveyor chain, stainless steel chain, agricultural chain. With Xihu (West Lake) Dis.hua brand registered in more than 70 countries like America, Europe, Japan, it is building long term cooperation with these world top enterprises, such as JOHNDEERE, NEW HOLLAND, CLAAS, HONDA, KUBOTA, YANMAR. 

 

There is a technical center of province level, Xihu (West Lake) Dis.hua academician working station, experiment station for Xihu (West Lake) Dis.hua post doctors, and national hundreds of program set up in Xihu (West Lake) Dis.hua group. With these platforms and strong technical ability, the more than hundreds of Engineers and technicians have developed all variety of special high precise and high strength products, conducted mold programs for key components in the car and national industry revitalizing program. 

 

Great attention has been paid on environmental protection and energy saving. The product well displays environmental protection and energy saving. In the year of 2 0 0 0, Xihu (West Lake) Dis.hua took the lead in gaining I S O 1 4 0 0 1 environment management certificate and thereafter passed the inspection of clean production and recycling economy, winning the title of “ZHangZhoug Green Enterprise”.

 

“We are always serving our customers with our best products.”

Roller Chain Basics

Prior to picking the appropriate roller chain for your device, it is required to find out some basics. Discover about sprockets, tensile power, pitch, and width. Study this article to learn much more. It will assist you make an knowledgeable choice. Obtaining the right item is crucial, but it really is not constantly as easy as choosing a model title. You want to select a firm that supports its products and offers good services.
chain

Roller sprocket

If you are organizing to acquire roller sprockets for your application, you should first seem at the different varieties offered. Sprockets accessible for one-strand roller chains are made by Boston Steel – Kind B sprockets are drilled to measurement. They are obtainable in 1/4, 3/8, 1/2, 5/8, 3/4 and 1″ pitch dimensions.
The diameter of the sprocket is important when selecting the right sprocket for your software. Making use of a caliper to measure the diameter of a toothless plate is a excellent way to establish the actual dimension of the sprocket. A caliper is the diameter of a plate with out teeth. On Type B and C sprockets, the hub diameter actions the thickness of the hub.
One more type of sprocket is the metal split sprocket, which is split in diameter. This kind is easy to install and get rid of, and is held together by bolts in the hub. Typically, break up sprockets have chain pitches ranging from 40 to 240 and bores ranging from 3/4″ to 6″. The break up sprockets are developed with one particular pointing in the direction of the ceiling and the other two parallel to the flooring.
When searching for sprockets, it is crucial to keep in mind that they are designed exclusively for a particular chain. All chains are made to particular requirements. In the United States, the most widespread regular is ANSI. The chain pitch is the length between the heart of every pin and the heart of the following pin. In the US, the normal is usually measured in eight-inch intervals.
In addition to sprocket measurement, sprocket pitch and the floor area also affect chain daily life. Unlike belt sprockets, which are manufactured of cast steel, the teeth on roller sprockets are stamped from metal sheet or pressed from powdered metal. The more difficult the teeth, the lengthier the chain will previous.

Roller chain pitch

The pitch of a roller chain is the length among the sprocket and the pin. The more compact the thread pitch, the more compact the bushing wear. Normally speaking, the smaller sized the pitch, the lengthier the existence of the chain. For very best performance and longest lifestyle, companies suggest a least chain pitch of 2% to 3%. Chain pitch is crucial to make certain suitable overall performance, and the manufacturer recommends that you replace the chain when it reaches 2% to 3% of typical.
To establish the appropriate chain pitch for a certain chain, very first figure out the sprocket dimension and pitch. Pitch is the length amongst pin centers, measured in 1/8 inch increments. The pin diameter of the chain is also essential. If you might be not sure about the pin diameter of your chain, evaluate a handful of back links to get a very good average reading through. Alternatively, use a caliper to measure the inside diameter of the sprocket and rely the number of tooth.
When sizing a sprocket, measure the chain in between the gears with a caliper and examine it to the measurements on the chain dimensions chart. Make positive you have checked all the specs and checked the proper chain pitch. Then, choose the correct chain pitch for your needs. This is a critical stage in choosing the appropriate chain. So get the correct pitch for your roller chain. Proper pitch helps make sure optimum efficiency and safety.
To recognize a particular type of roller chain, measure its tensile strength. This represents the volume of load the chain can face up to just before breaking. One more key parameter to consider is exhaustion energy. Chains with high tiredness toughness are more resistant to rust and put on than chains with low fatigue toughness. The numbers on the proper in the common numbering symbolize standard or light-weight obligation chains, while the figures on the remaining symbolize the pitch of hefty-responsibility chains.
Double pitch roller chains are a variant of one pitch chains. They are created in accordance to ISO 606 and fulfill the very same expectations as single pitch chains. They are primarily utilized in programs with decrease needs for pace and electrical power transmission. The plates of double pitch roller chains are also longer than single pitch chains. The double pitch travel collection is also employed for elevator and prolonged conveyor drives. There are three primary varieties of roller chains: single-pitch chains, double-pitch carriers, and oversized rollers.

Roller chain width

When getting a roller chain, a single of the 1st conclusions you have to make is its width. To make this dedication, you need to have to measure the overall width of the chain, the diameter, and the width of each and every roller. You must also know the top and thickness of the board. After using these measurements, you can start off purchasing for the excellent roller chain. But ahead of you acquire a new chain, it really is crucial to know what to assume from the chain alone.
There are numerous different kinds of roller chains. These chains are accessible for ANSI and metric measurements. They come in single-stranded and double-stranded variants. They are generally utilised for energy transmission. Other sorts consist of agricultural, automotive, conveyor, multi-strand, and 4-strand chains. These charts also include a chart so you can simply see the exact size you require. Detailed below are some of the positive aspects of purchasing a roller chain.
Roller diameter and pin diameter are critical elements in selecting the appropriate chain width. The width of the chain is the nearest binary portion of 5/8 of an inch. It need to be at least half the thickness of the sprocket, and the plate thickness is a single-eighth the width of the chain. Over weight chains are indicated with the suffix H. The pitch and width of the chain are identified by the operating load and equipment pace.
The outer backlinks of the roller chain are referred to as pin backlinks. These pins are inserted into the bushings of the adjacent roller hyperlinks. They are held in spot by cotter pins. Pin backlinks are normally pressed into the pins of hefty-responsibility chains. These pins are employed to keep the rollers in spot. Nevertheless, these pin chains can lessen the electrical power ranking of roller chains by up to 20%.
The ANSI 29.1 Steel Chain Specification specifies a bare minimum pitch in inches and supreme power of twelve,500 x pitch in inches. At the exact same time, the O-ring chain drastically decreases wear owing to its lubricating impact. O-ring and X-ring chains have a lubricant injected by vacuum when riveting the chain together. Transmission chains are examined and governed by expectations bodies such as ANSI. In 2011, the American Modern society of Mechanical Engineers created a normal for precision energy transmission chains.
chain

Roller chain tensile energy

1 of the most crucial indicators of roller chain energy is tensile energy. This measurement refers to the quantity of load the chain can stand up to before breaking. One more measure, known as tiredness toughness, refers to the maximum load a chain can endure just before it breaks. The strength of a roller chain depends on its measurement, the quality of the steel utilised in its building, and the warmth treatment. There are also distinctions in the kinds of shot peening employed to treat metal, pitch holes, and website link plates.
When deciding on a roller chain, the workload is critical. This is the greatest load the chain can withstand before fatigue failure takes place. This measurement is vital since it aids decide the type of load used to the chain. When deciding which roller chain to purchase, be confident to think about the mechanical type and preferred power. Then, make positive it fulfills strength and load-carrying potential requirements.
The final tensile power of a roller chain is based mostly on the manufacturer’s advisable highest tensile strength. Even so, the real tensile energy may possibly be higher or decrease than this worth. The working load restrict of a roller chain can also be calculated by multiplying the chain diameter by the grade. The functioning load limit of a chain is the greatest rigidity it can face up to just before breaking. This benefit is usually expressed in points.
The greatest tensile strength of roller chains varies by chain type. The one-strand large chain has thick facet plates for greater shock hundreds. Single strand heavy-duty roller chains, also recognized as “bushing” roller chains, are also offered. Double-stranded weighty chains are structurally equivalent, but they have two layers of metal linked by pins that are almost two times as sturdy as standard roller chains.
The tensile power of a solitary-strand roller chain is about five hundred tons. In comparison, a solitary-chain blockchain has a tensile power of 900. The tensile power of the two is equivalent, and it is not recommended to decide on 1 or the other. Even though steel and titanium chains are regarded the strongest resources for roller chains, these supplies are not magnetic.

China wholesaler Standard Chains and Special Solid Color overhead conveyor Roller Chain     with Great quality

China manufacturer Carbon Steel Agricultural Chains /Stainless Steel Roller Chain and Conveyor Chain near me supplier

Item Description

Agricultural machinery, Upkeep of agricultural machinery, 
Maintenance and right after-product sales provider of agricultural machinery,agricultural equipment component and parts,farm equipment generation,administration for agricultural equipment,farm equipment generation

Tips for Buying Roller Chains

There are numerous items to take into account when getting a new roller chain. Chains can be heavy-duty roller chains or self-lubricating chains. These variables all affect the put on of the roller chain. Suitable lubrication and adjustment are crucial to prolong the existence of the chain. Right here are tips for acquiring a new roller chain. Some frequent kinds of roller chains are detailed underneath. The kind you select depends on its function.

Bushingless Roller Chains

The tensile toughness of a bushingless roller chain is usually the major measure of its longevity. It signifies the maximum load a chain can stand up to ahead of breaking, but tiredness strength is just as essential. Aspects that have an effect on exhaustion energy include the steel utilised to manufacture the chain, the good quality of the pitch holes, the type of shot peening used, and the thickness and style of the chainplates. Below are some guidelines on how to examination the tiredness power of bushless roller chains.
The internal url plate a hundred thirty is thicker than the outer hyperlink plate a hundred and twenty. This function aids the connecting pins and rollers continue to be steady. This function minimizes use and sounds. It also improves the general sturdiness of the chain. As opposed to traditional chains, bushingless roller chains are simpler to preserve than comparable chains. They also lessen the chance of sprocket wear. Bushingless roller chains are ideal for demanding applications exactly where noise is a concern.
Unlined roller chains are generally less high-priced than lined roller chains. Bushings are built-in into the inner plate, even though people in typical chains are inserted into the outer plate. The end result is lower value and much more adaptable lateral movement – a necessity for contemporary derailleur gearing. But with all these rewards, choosing a linerless chain is nonetheless essential. You must go through reviews about the toughness of bushingless roller chains just before getting.
In its simplest form, the connecting pin a hundred and forty is pressed into the pinhole 126 in the course of chain vacation. Connecting pins a hundred and forty increase through these holes to hook up the internal url plate and the rollers. The connecting pins can also be welded to the outer hyperlink plates. In the course of assembly, chain C can be effectively assembled from 1 aspect in the engine width direction. If you have an older car, you can consider the bushless edition and see how it goes.
Yet another variation of bushless roller chains involves sprockets and connecting pins. The outer link plate has connecting pins extending by way of holes in the interior hyperlink plate. The rollers are in a position to rotate on the connecting pins, therefore lubricating them. There are two sorts of bushingless roller chains: connecting pin chains and sprocket chains. These two kinds of bushingless roller chains are usually interchangeable.
Linerless roller chains can incorporate chain guides. In the course of the riveting procedure, the outer and inner url plates compress from every other, minimizing friction and electrical power loss. ANSI Regular B29.1-2011 is made to make it less difficult for you to pick the right chain for your motor vehicle. This version is also quieter, decreasing noise. In addition to improved efficiency, bushingless roller chains provide much better sturdiness. It is less complicated to install and much less costly to maintain.

Solitary Strand Weighty Duty Roller Chain

Single Strand Heavy Responsibility Roller Chains, also identified as Single Strand Hefty Obligation Roller Chains, are available in a assortment of sizes. These chains run on regular roller sprockets and have thicker facet plates. These boost their tensile toughness, fatigue ranking and total doing work daily life. Monostrand chains are available in 3 quality amounts: riveted, open up and closed.
If your chain requirements to be replaced, your best guess is to get replacement components. Solitary strand roller chains are usually 10 feet prolonged. For bigger dimensions, contemplate buying a solitary-strand hefty-obligation roller chain that is three instances for a longer time. This way, you don’t have to be concerned about damaging your device. Oregon roller chains are created to OEM specifications.
CZPT Plus Large Responsibility Roller Chains function strong rollers for mild to medium obligation programs. It satisfies ANSI B29.1 sturdiness requirements and is ideal for light to medium obligation applications. CZPT Plus Hefty Duty Roller Chains have sound bushings in picked dimensions to ANSI B29.1. CZPT Plus hefty obligation roller chains are equipped with ample lubricant. If your application demands large responsibility roller chains, you can find them at CZPT Chain and Sprockets.
In addition to single-strand hefty-responsibility roller chains, there are a few-strand heavy-responsibility roller chains. These chains can withstand massive force and are best for purposes in agriculture, sewage treatment, equipment, and far more. They are developed to very last for a long time with out breaking. So regardless of whether you happen to be seeking for a heavy obligation roller chain for your farm products or design, American Roller Chain has you protected.
In get to decide on the appropriate dimension for your demands, you need to very first establish the diameter and total width of the roller chain. You also have to measure the width of the drum itself. This information will establish how numerous chains you want to get. The measurement and assortment of dimensions will establish the price of your new roller chain. Getting the appropriate roller chain is straightforward and practical if you comprehend all of these variables. So use a caliper and make sure the roller chain is calculated properly.
The measurement of a one strand hefty obligation roller chain is essential to the security of your company. You can save a whole lot of cash by buying a high-top quality roller chain. Just make positive to store it effectively. Its shelf life is virtually unlimited. When properly stored, a single-strand weighty responsibility roller chain can enhance the stability of your business for a long time to appear. A one-strand chain is an affordable investment decision that will shell out dividends for your organization.

Self-lubricating roller chain

Self-lubricating roller chains can be utilized in a assortment of programs. This kind of chain is an excellent decision for areas that cannot be manually lubricated. It also reduces the risk of contamination as no lubricant is essential at all. Self-lubricating roller chains are available in a selection of designs and are suitable with a vast range of foodstuff programs. If you’re intrigued in studying more about these kinds of chains, preserve reading through!
There are two primary sorts of chains of this type: DIN ISO 606 and DIN 8187. They are related in building to classic chains, but are more sturdy. They have increased friction and dress in resistance than standard roller chains. These chains are also really powerful in applications that need a great deal of humidity and drinking water flushing. They demand significantly less upkeep and can final a extended time. One more advantage of self-lubricating chains is that they final longer than regular roller chains, which can be really expensive.
An additional self-lubricating roller chain is the non-lubricating variety. These chains are internally lubricated and isolated from the external surroundings. Best for reduced to higher load apps, these chains will previous 5 to 20 occasions for a longer time than equivalent to begin with lubricated roller chains. Self-lubricating roller chains have so many benefits, you are going to be happy you purchased one particular.

China manufacturer Carbon Steel Agricultural Chains /Stainless Steel Roller Chain and Conveyor Chain     near me supplier

China Hot selling 80 Roller Chain Straight Side Plates China Series Short Pitch Best Price CZPT Special Attachments Double Lumber Sharp to Type Engineering Conveyor Chains with Free Design Custom

Merchandise Description

eighty Roller Chain Straight Aspect Plates China Collection Limited Pitch Best Cost Manufacture Unique Attachments Double Lumber Sharp to Type Engineering Conveyor Chains

HZPT Chain Corp. offers a full range of both precision roller chain and engineered. Applications are different and variety from conveyor, elevator transfer to broad general industrial electrical power transmission specialty purposes with attachments and/or specific resources are also available.

BICYCLE CHAIN: 408,410,415

Bike CHAIN: 04C, 25H, 06C, T3, 270H,415H, 420, 420L, 425, 428, 428H, 520, 525, 530

ASA ROLLER CHAIN: 35, forty, forty one, 50, 60, 60H, eighty, 80H, 100, a hundred and twenty, 140, a hundred and sixty, two hundred, 240 (Catalog)

CHAIN (BRITISH STHangZhouRD): 05-B, 06-B, 08-B, 10-B, twelve-B, 16-B, 20-B, 24-B, 28-B, 32-B, 40-B (Catalog)

Massive PITCH CHAIN: one hundred, 100H, a hundred and twenty, 120H, a hundred and forty, 140H, 160, 160H, a hundred and eighty, 200, 240

Lengthen-PITCH PRECISION ROLLER CHAINS: 208A, 208B, 210A, 210B, 212A, 212B, 216A, 216B,220A,220B,224A,224B,228B,232B

 

ROLLER CHAINS FOR BEER BOTTLINET CONVEYORS: CK-70S,CK-100S,CK-100SA,CK-100SC,CK-133XA, CK-140X, CK-140XA,CK-150X,CK-150S,CK-154X,CK-155X,CK-155XA,CK-160X,CK-160XA,CK-160XB,CK-160XC,CK-165X, CK-165XA, CK-169, CK-180X,CK-180XA,CK-200S,CW-102,CW-127

Implement ROLLER CHAINS FOR CONVEYORS: 81X, 81XH,81XHH,CA550,CA555,CA620

By adopting integrated the best possible style of the structural dimensions, areas content and
warmth remedy procedure, the final tensile power of SP series higher energy roller
chain is 28% a lot more than that of A sequence standard roller chain. In addition, it has excellent
performances of fatigue toughness and effect resistance and so forth..

 

 

Kinds of roller chains and their applications

There are numerous factors that can trigger premature use of the roller chain. They contain friction, exterior shocks, and absence of lubrication or adjustment. Listed here are some ideas to help you prevent untimely chain use. Go through on to discover much more about the various varieties of roller chains and their programs. You will be shocked how rapidly the roller chain wears out! Below we have listed some of the most frequent triggers of premature roller chain use.

Double strand hefty-obligation roller chain

If your application needs a weighty-obligation chain, a double-strand metal roller chain is an exceptional option. Double-strand steel roller chains are created to reduce tension fatigue and stretch, generating them best for industrial and logging gear. This type of chain is also heat-dealt with and shot-peened for outstanding exhaustion resistance and power. Listed beneath are some of the benefits of double-strand hefty-obligation roller chains.
When evaluating single-strand and double-strand large-obligation roller chains, double-strand metal roller chains are typically greater. They have twice as numerous aspect plates and a operating load near to that of a twin-strand metal roller chain. Unlike single-strand metal roller chains, double-strand roller chains are not interchangeable with normal double-sprockets. They use sprockets specially manufactured for double chains.
Double strand chains are specifically sturdy, resistant to rust and corrosion, and ideal for substantial-pressure applications. They are typically utilised in conveyor systems, paper mill gear, ditches, lifts, seed drills, and a variety of hoisting machinery. They are also utilized in the wastewater and foods processing industries. Chains of this kind are utilised on conveyor strains, so they are an excellent decision for hefty equipment.

Nickel-plated chain

Nickel-plated roller chains are ideal for outdoor function, mildly corrosive environments, and programs demanding a great chain visual appeal. Nickel plating increases ingredient hardness and enhances use resistance although guaranteeing that all surfaces are guarded. The advantages of nickel-plated roller chains incorporate elevated longevity, corrosion resistance, and a brilliant shine. Below are a few factors to use this kind of a chain. All chains are made to the optimum good quality and basic safety standards.
Despite the fact that somewhat corrosive, nickel-plated roller chains are perfect for programs in high salt and substantial humidity environments. However, nickel plating can peel and chip, so nickel roller chains are not suggested for use in food processing or other environments uncovered to corrosive substances. ANSI B29.1 common chain can be nickel-plated and is best for a range of purposes like industrial garage doors and boat lifts.
CZPT United states of america Corp. is committed to becoming the premier agricultural and industrial chain provider in the United States. By concentrating on top quality, they guarantee their chains supply lengthy daily life and unmatched put on resistance. If you might be looking for a top quality plated roller chain, take into account choosing a chain from a major producer. If you need the durability and toughness of a nickel roller chain, decide on CZPT United states of america Corp. We manufacture the optimum quality chains in the Usa.
In addition to high strength, nickel-plated roller chains are also available in elastomer profiles. These kinds of chains can take care of 1/2 to 3/4″ loads, relying on their pitch. They are also best for light traction on delicate surfaces. The power of these chains depends on the sort of the principal website link utilized in the chain. Nickel-plated roller chains are available in a selection of measurements and are priced to go well with a variety of purposes.

Stainless steel chain

Stainless steel roller chains are perfect for industrial apps in two severe environments. They have excellent chemical and corrosion resistance, as well as high power. Chains are available in 3 grades to meet up with various operational needs. 304SS is ideal for food speak to programs, whilst 316SS and 606SS offer you excellent corrosion resistance. 600 collection stainless metal provides excellent corrosion and wears resistance with precipitation hardened elements.
In food processing, stainless metal chains are frequently uncovered to really high temperatures and higher concentrations of acids, alkalis, and drinking water. They are also resistant to higher concentrations of acid and chlorine. And their low magnetic permeability permits them to function properly in hygienic situations. But stainless steel roller chains also have some drawbacks. Despite their exceptional corrosion resistance, these chains are not recommended for use in meals processing environments.
In comparison to carbon steel, stainless metal roller chains are softer and hold longer. This indicates it may put on out more rapidly. Because stainless metal is not heat-handled, its area hardness is distinct from carbon steel. It retains warmth for lengthier, minimizing its tensile power and extending its lifespan. Nonetheless, stainless metal roller chains are perfect for a variety of industrial applications.
The stainless steel roller chain is made of high-high quality content. For example, the Premier sequence stainless steel roller chains are manufactured in Japan using a specific variety of stainless steel shot peening process. They also characteristic a reliable roller design that reduces aspect flex. The Leading range also features highly polished aspect panels and is obtainable in 10′ packing containers, 50′ reels, and 100′ reels. They can also be lower to size if required.

Accumulation conveyor

Roller chain accumulation conveyors are created to transportation loads up to 440 lbs or two hundred kg. The accumulator chain is situated on large loafer rollers to make certain silent procedure and the bare minimum power essential to hold the pallet. They are suited for numerous purposes and can be built-in into the complete processing system. These conveyor belts have T-slots on three sides of the profile body for connecting brackets and sensors.
Sensors put in in the accumulation location detect objects on the conveyor line and deliver signals to the motors that electricity the accumulation location. The motor can be external or developed into the drum alone. Other kinds of sensors use gentle, this sort of as photosensors. Photoelectric sensors detect objects by emitting and obtaining particular wavelengths of light-weight. This option is expense-effective since the sensor rollers are located slightly above the surface of the conveyor line.
Roller chain accumulation conveyors can be made of metal or plastic rollers. It can be outfitted with staggered or coaxial rollers. Security go over stops accidental insertion of fingers into the chain, strengthening operator basic safety. The protection cover is appropriate with the chain variety and needed bend radius. These caps are produced of plastic clips that in shape completely on the inner hyperlinks of the chain. They do not interfere with conveyed merchandise or workpiece carriers.
There are two fundamental kinds of accumulation conveyors: cost-free stream and accumulation. Free-flowing chains permit conveyed objects to slide immediately onto the chain although stacking chains let items to slide under the chain. Accumulation chains are commonly used in the meals and packaging industries and have rollers that support conveyed objects. The totally free-flowing conveyor system eradicates the chance of harming objects, as the rollers in the accumulation conveyor are in immediate speak to with the base of the cargo.

Personalized attachment

Common add-ons for roller chains are available in a range of variations. Typically, they can be assembled on pin or roller back links. When referring to connecting chains, it is critical to know how to refer to pitch and center-to-centre spacing. The pitch of the roller chain must include interior and outer roller back links and need to alternate each and every a few pitches. In addition, you can purchase custom accessories for pin or roller linkages. Under are some examples of customized components for roller chains.
Stainless metal roller chains are one particular of the most nicely-known chains for this software. It has a stainless metal 304 finish to create curved and straight lugs. For even more adaptability, you can also ask for custom made add-ons this sort of as chain plate holes and pins. For extra security, numerous equipment can be hooked up to the single-pitch roller chain. It can also be created with numerous pins or curved lugs.
HKK Chains is stocked with much stainless metal and carbon steel standard connecting chains. Most of the time, they can assemble a customized accent chain in no time. For illustration, a one-pitch chain with two connecting holes is known as a broad profile. Moreover, chains can be made in a variety of supplies, which includes carbon steel, stainless metal, Lambda, plastic, and Ultra WP. In addition, a wide range of unique equipment is offered for specific industries.

China Hot selling 80 Roller Chain Straight Side Plates China Series Short Pitch Best Price CZPT Special Attachments Double Lumber Sharp to Type Engineering Conveyor Chains     with Free Design Custom