China Hot selling Genuine CZPT Rsc45c2 Container Reach Stacker Spare Parts Drag Chain Cable Track B229900003089

Product Description

Original Replacement CHINAMFG Drag Chain Cable Track B2299     Plate Sealing
6057167     Pad liner sealiind Plate
6057148     Pad sealing Control valve
6057183     BODY Sheel torque converter
60138654     Pump Prefill
60138719     Valve adjusting Perefill pump
65710957     Relay
    Rocker Switch
A2412     Switch Column
60191985     Switch Column
15719797     Cylinder Seal
6571549     AC Compressor
60143815     Joystick
1426571     Crankshaft Seal
168899     Oil Pump
65715663     Oil Level
168899     O Ring
168899     Cardboard Tube Engine Oil
168899     Gasket Oil Cooler
168899     O Ring
    Pump Fuel Hand Pump
168899     Cardboard Tube
6 0571 404     Fuel Filter Assy
168899     Fuel Hose
168899b01     Fuel Pump Assy With Support &gear
21798446     Fuel Pump Support
60267980     O Ring
61017873     Injector With Caliberation
168899     Turbocharger Low Rating
168899     Hose Clamp
60344726     Relay
168899     Coolant Pump
65715538     Alternator
    Starter Motor
61017872     Boost Pressure Temp. Sensor
65715685     Pressure Sensor
168899     Flange Screw
60267753     Temperature Sensor
65715684     Pressure Sensor
60267752     Speed Sensor
65715682     Pressure Sensor
60132389     O Ring
60267751     Temperature Sensor
65715683     Pressure Sensor
A2299     Engine Fan Belt
B2299     Outlet Air Conditioner Vent Cover
60191986,     Armrest Overturning Cylinder Lower Bracket
60134976     Pin
60134799     Spring
6     Wiring Harness
22296415     Fuel Filter with O Ring
21538975     Fuel Filter Water Spearator
13852940     Outlet
6056.066     Joystick
2215712, 2215711    Lock Hook
60199876     Cltuch Booster
A81571571035    Pressure Plate,Rear Spring,Suspension
A215711     Bracket,Thrust Rod,Suspension
11 0571 1     Wire,Steel,Suspension
A82571711     Block,Bumper,Suspension
10490661     Plate,Pressure,Bumper,Block,Suspension
A    Bolt,Couple Tie,Suspension
10136396     Beam
    Bolt Clamp,Spring Gp Rear
    Tube,Sleeve,Clip,Spring Gp Rear
    Nut,Clamp,Spring Gp Rear
10136395     Rocker Beam,Beam Gp
A81571571571    Seat, Center
A215711     Ring, Dust Proof
A    Bolt
A    Cover,End,Center Shaft,Suspension Gp
A    Power Steering Pump

Container Reach Stacker Parts

Power System
Engine Transmission Assembly, Turbine Shaft, Hub Assembly, Transmission Plate Assembly, Pump Transmission Assembly, Front Wheel Drive, Transmission Gear Set, Clutch Shaft Assembly, Electric Control Valve Assembly, Handling Cover Assembly, Pressure Regulating Valve, Chongye Pump, Control Valve box cover assembly, electronic control valve assembly, double filter, fuel assembly, cooling assembly, intake assembly, air filter, intake pipe bracket, exhaust assembly, muffler
Frame Assembly
Fixed weight system, fender, cover, rearview mirror assembly, wind deflector assembly, cover assembly
Front window wiper assembly, rear window wiper assembly
double pedal
Air Conditioning System
Boom Assembly
Pitching cylinder, lower slider assembly, upper slider assembly, damping cylinder, telescopic cylinder assembly
Spreader Body
Right telescopic beam assembly, twist lock mechanism, ejector rod device, twist lock device, push rod assembly, slider seat assembly, lubricating oil pipeline assembly, reducer, main beam assembly, telescopic cylinder, hydraulic system, one-way Valve, Rotary Valve, Solenoid Reversing Valve, Telescopic Lock Valve Group

Company Profile

HangZhou CHINAMFG Technology Equipment Co., Ltd is a high-tech enterprise that integrates scientific research, design, production and sales. The company has strong technical force, advanced production technology, complete facilities, and has several senior technical engineers, constantly introducing more high-tech products suitable for market needs, which have good functional effect, and great market competitiveness.
In the process of development, the company continuously exchanges and cooperates with many domestic scientific research institutions. The ability to design, produce, maintain, debug and transform projects has rapidly increased, and the scale has continued to expand.
The company’s aim is to provide customers with quality and cheap products, and provide considerate service. In order to meet different needs, we supply high-quality products for the industrial-grade market and provides regular-quality products for professional-level markets and users. As a professional manufacturer, we independently researches and develops a variety of professional production equipments that are suitable for the characteristics of its products. At the same time, we can also customize them according to your requirements.

Packing and Shipping

We supply CHINAMFG / Konecranes / CHINAMFG / Fantuzzi / CVS port machinery empty container reach stacker spare parts.
If you need these,please contact us.

 

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

After-sales Service: Spare Parts Warranty
Warranty: Spare Parts Warranty
Type: Drag Chain
Application: Hoisting Machinery
Part Name 1: Drag Chain
Part Number: B229900003089
Customization:
Available

|

Customized Request

pintle

What are the temperature limits for drag chains in extreme environments?

Drag chains are designed to operate in a wide range of temperatures, but their temperature limits can vary depending on the materials used in their construction. In extreme environments, such as those with high or low temperatures, it is essential to select the appropriate drag chain that can withstand the specific conditions. Here are some general temperature guidelines for drag chains:

  • Standard Drag Chains: Most standard drag chains can typically handle temperatures ranging from -40°C to 80°C (-40°F to 176°F). These are suitable for many industrial applications with moderate temperature variations.
  • High-Temperature Drag Chains: For applications that involve higher temperatures, specialized high-temperature drag chains are available. These can handle temperatures up to 250°C (482°F) or even higher, depending on the materials used, making them suitable for use in hot environments like foundries or ovens.
  • Low-Temperature Drag Chains: In cold environments, where temperatures can drop significantly below freezing, low-temperature drag chains are used. These can withstand temperatures as low as -50°C (-58°F) and are commonly used in freezer storage systems or cold storage facilities.
  • Heat-Resistant Materials: Drag chains can be manufactured using various heat-resistant materials, such as stainless steel, special plastics, or composite materials, to withstand extreme temperature conditions without compromising their performance.

It is crucial to consult with the drag chain manufacturer or supplier to ensure that the selected drag chain is suitable for the specific temperature range of the environment in which it will be used. Using drag chains with appropriate temperature limits helps to maintain reliable cable protection and system performance even in extreme conditions.

pintle

Can drag chains be used in wastewater treatment or sewage systems?

Yes, drag chains can be used in wastewater treatment and sewage systems to manage and protect cables and hoses. These systems often involve complex machinery and equipment that require proper cable management to ensure smooth and efficient operation. Drag chains offer several benefits that make them suitable for such applications:

  • Cable Protection: In wastewater treatment and sewage systems, various cables and hoses are used to control pumps, valves, and sensors. Drag chains enclose and protect these cables from exposure to water, chemicals, and debris, preventing damage and prolonging their lifespan.
  • Durability: Drag chains are typically made from durable materials like steel or reinforced plastics, making them resistant to wear, corrosion, and the harsh environment often present in wastewater treatment facilities.
  • Smooth Movement: The smooth and controlled movement of drag chains ensures that cables and hoses are guided without tangling or snagging, even in applications with continuous motion or high-speed operations.
  • Cable Organization: Drag chains help organize cables and hoses neatly, reducing the risk of entanglement and simplifying maintenance and repair tasks.
  • Contamination Prevention: Drag chains provide a barrier that helps prevent contaminants from entering cable and hose channels, minimizing the risk of clogs or malfunctions.
  • Reduced Downtime: By protecting cables and hoses, drag chains help reduce downtime caused by cable failures or damage, leading to increased overall system reliability and efficiency.
  • Adaptability: Drag chains are available in various sizes and designs, allowing them to be customized to fit specific wastewater treatment or sewage system requirements.
  • Resistance to Chemicals: Many drag chain materials are resistant to chemicals commonly found in wastewater and sewage systems, ensuring long-lasting performance even in corrosive environments.

In conclusion, drag chains are a valuable cable management solution for wastewater treatment and sewage systems, providing protection, organization, and durability in challenging industrial settings.

pintle

Can drag chains handle heavy loads and protect cables in dynamic environments?

Yes, drag chains are designed to handle heavy loads and provide effective cable protection in dynamic environments commonly found in industrial applications.

Drag chains are constructed from durable and robust materials, such as plastic or metal, which enables them to withstand the weight of numerous cables and hoses. They are engineered to carry a variety of cables, including power cables, data cables, hydraulic hoses, and pneumatic lines, all within a single chain structure.

The design and construction of drag chains allow them to operate smoothly in dynamic environments, where there are constant movements, vibrations, and changes in motion. They can handle multi-axis movement, such as back-and-forth, side-to-side, and rotational motions, without compromising cable protection.

Drag chains utilize flexible links that allow for bending and twisting, ensuring that the cables inside can move freely and follow the motion of the connected machinery or equipment. This flexibility prevents cable fatigue and reduces the risk of damage caused by repetitive motion or constant tension.

In dynamic environments, where machinery or equipment experiences rapid acceleration and deceleration, drag chains play a crucial role in keeping the cables organized and preventing them from tangling or snagging. They act as a reliable cable carrier, guiding the cables along the intended path and protecting them from potential hazards.

Furthermore, drag chains are equipped with various mounting options and brackets to secure them to the equipment securely. This anchoring ensures that the drag chain remains in place even during fast-paced movements, providing consistent cable protection and preventing unnecessary strain on the cables.

In summary, drag chains are well-suited for handling heavy loads and providing effective cable protection in dynamic industrial environments. They offer flexibility, durability, and reliable cable management, making them a vital component in ensuring the longevity and optimal performance of cables in various industrial settings.

China Hot selling Genuine CZPT Rsc45c2 Container Reach Stacker Spare Parts Drag Chain Cable Track B229900003089  China Hot selling Genuine CZPT Rsc45c2 Container Reach Stacker Spare Parts Drag Chain Cable Track B229900003089
editor by CX 2024-04-17